Upgrade Firmware From A File; Reset Your Gateway; Clear Account Details Only - NETGEAR Sprint 6100D User Manual

4. In the Alert message for the available update, click Install Now.
5. Follow the onscreen instructions.
To get the update from the Software and Reset page:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Click Check for update. If an update is available, an Install Now button appears.
6. Click Install Now.
7. Click Continue.

Upgrade Firmware from a File

A one-click tool may be available for upgrading firmware from a file in enterprise environments.
Contact Sprint for details.

Reset Your Gateway

In some cases, you may want or need to clear your account information to use your gateway
with another account, reset most settings (except for your account and network activation), or
reset your device to its factory default settings.
You can clear these settings from your device's Reset screen, or from the gateway's Software
and Reset page.

Clear Account Details Only

If you want to use your device with another account, you need to clear your current account.
You can clear these settings from your gateway's Reset page, or from the Software and Reset
page.
Note: All connected devices will be disconnected and your device will reboot automatically. You
will have to activate your device with your new account before they can reconnect.
To clear account details:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
Software and Reset 97