NETGEAR Sprint 6100D User Manual page 78

4. Click Settings > Network > Ethernet.
5. To change the IP address setting, select one of the following radio buttons and click the
Submit button.

Get Dynamically from ISP. This is the default setting, which works with most
Internet connections. The ISP assigns IP addresses as needed.

Use Static IP Address. If your ISP has assigned you a static IP address, select this
radio button and type the IP address, subnet mask, and gateway IP address into the
fields.
6. To change the Domain Name Server (DNS) Address setting, select one of the
following radio buttons and click the Submit button.

Get Automatically from ISP. This is the default setting. The ISP automatically
assigns DNS servers.

Use These DNS Servers. To use specific DNS servers, select this radio button and
type the appropriate IP addresses in the Primary DNS and Secondary DNS fields.
7. To change the MTU size, type a value in the MTU Size field and click the Submit button.
Note: The maximum transmission unit (MTU) is the largest data packet a network device
transmits. For more information about this setting, see
Gateway Settings
MTU Size.
71