Enable Port Forwarding For An Application - NETGEAR Sprint 6100D User Manual

4. Click Settings > Router > Port Forwarding.
5. Next to Port Forwarding, select Enable.
6. Click Submit.

Enable Port Forwarding for an Application

You can enable port forwarding for certain application types.
Note: Port forwarding must currently be enabled. (See
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Forwarding.
5. In the blank row of the list, enter a Name that describes the application (for example,
"RandomEmailApp").
6. In the IP field, enter the IP address of the server to be accessed.
7. In the Port field, enter the port used by the application. (If the application uses more than
one port, each port must be forwarded separately.)
8. In the Protocol list, click the protocol(s) used for this application (TCP, UDP).
9. Click the to add this row to the list.
10. Click Submit.
Gateway Settings
Enabling Port Forwarding.)
80