System Logs - NETGEAR Sprint 6100D User Manual

The following information is displayed.
Item
Download /
Backup
Restore Settings
Software Update
Firmware Update
Factory Reset
Reset

System Logs

Technical support staff may need you to configure system logging in this page for the purpose
of error diagnosis.
Note: You should only adjust settings on this page under the direction of technical support staff.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
Description
Click Save to make a copy (export) of the gateway's current
configuration, so that you can restore it later if needed. See
Settings.
Click Choose file to use a previously saved copy of your device
configuration. See Importing
Click Check for update to see if a new version of software has been
released and if there is, download and install it. The last time you
checked is shown on the screen (Last checked at). See
Update the Software and
Note: Software downloads count against your plan's data limit.
Click Upload to see if a new version of your device's firmware has been
released, and if there is, download and install it.
Click to reset your device to factory default settings and clear your
account details. See Reset the Gateway to Factory Default
(You can only do this with assistance from Sprint.)
Settings Reset – Click to reset your device to factory default settings,
but leave your Sprint account details unchanged. See
Reset Device Settings
Clear Programming – Click to clear your account details. See
Clear Account Details
Settings.
Firmware.
Only.
Only.
Exporting
Settings.
60