NETGEAR Sprint 6100D User Manual page 45

To specify computers that are not allowed to access the network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi and then click the MAC Filter tab.
5. Beside MAC Filter Mode, select Black list.
6. Determine and block an unwanted user of your network:
 In the Devices Connected section, if you see a device you don't recognize, you can
click its name and compare its MAC address to the MAC address of each of the
devices on your network.
Tip: To determine the MAC address of each device you have, see
Finding the MAC
device might be an intruder.
 In the empty Name field, enter a name for the device. For example, "Amy's PC".
 In the empty MAC Address field, enter the MAC address of the device you're adding
to the list.

Click the
7. For each device you want to block, repeat steps 4-6.
Tip: You can also block the device from the device list. See
Connected Devices (Block
Removing a Device from the Allowed or Disallowed Lists
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi and then click the MAC Filter tab.
5. In the list of allowed/disallowed devices, click the
Your Network Connections
Address. If none of your devices have this MAC address, that
beside the row.
List).
Display and Block Currently
beside the row.
38