NETGEAR Sprint 6100D User Manual page 50

4. Click Security > Remote Management.
5. Select the Turn Remote Management On check box.
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed
to access the gateway's remote management.
7. For enhanced security, restrict access to as few external IP addresses as practical.
8. Select one of the following:

To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.

To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the allowed
range.

To allow access from any IP address on the Internet, select the Everyone radio
button.
9. Specify the port number for accessing the web browser interface.

Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface.
Choose a number from 1024 to 65535, but do not use the number of any common
service port. The default is 8080, which is a common alternate for HTTP.
Security 43