Configure A Mac Computer As A Remote Client - NETGEAR Sprint 6100D User Manual

12. Click the Apply button.
13. Click the Save button.
14. To initiate the VPN connection to the gateway, right-click the tunnel on the left pane and
select Open Tunnel.
When the connection is initiated, the icon on the Tunnel menu on the left pane turns green to
indicate that the tunnel is established.
The remote client device can access the LAN-side resources of the gateway including access to
the gateway web management interface.

Configure a Mac Computer as a Remote Client

This example uses the IP Securitas VPN client software.
To configure a Mac computer as a remote client:
1. Download the trial version of IP Securitas VPN client and install it on the Mac computer.
IPSecuritas VPN client Version 3.4 for MAC OS platforms from Lobotomo Software is
available here:
2. Launch the VPN client software.
3. Click Connections > Edit Connections.
Set up a Virtual Private Network (VPN)
http://www.lobotomo.com/products/IPSecuritas/
107