Configure Access Point Names - NETGEAR Sprint 6100D User Manual

6. Click Submit.

Configure Access Point Names

Your gateway comes preconfigured with the Access Point Name (APN) for Sprint.
To add an APN for another network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network > Access Point Names.
5. In the blank line, enter the APN details:

Active: If the new APN is going to be used now, select this button.

Name: Enter a short description (for example, the carrier name).

APN: Enter the APN you obtained from the carrier.

Username: Enter the username you obtained from the carrier (if required).

Password: Enter the password you obtained from the carrier (if required).

Select the Authentication mode to be used (None, PAP, CHAP, PAP or CHAP).
Mobile Network Settings 91