Enable Or Disable The Roaming Guard Warning Message; Set The Network Mode - NETGEAR Sprint 6100D User Manual

Enable or Disable the Roaming Guard Warning Message

Use this feature to have your device display a warning when you enter a roaming area.
To enable or disable the roaming guard warning message:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network.
5. Beside Roaming Guard, select the warnings you would like to display (Domestic and/or
International).
6. Click Submit.

Set the Network Mode

Use this feature to select the types of networks that your device can connect to.
You can adjust this setting on the gateway's Settings > Network page, to one of the following
options:
● Automatic (LTE preferred) – The connection will be established on the fastest available
network.
● LTE only – The connection can be established only on an LTE network. Your device
will not connect to CDMA networks.
● CDMA only – The connection can be established only on a CDMA (3G) network. Your
device will not connect to LTE networks.
To set the network mode:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network.
5. Beside Network Mode, select the desired network mode that your device can connect to.
Mobile Network Settings 90