Led Settings; Login Settings; Change The Gateway Url - NETGEAR Sprint 6100D User Manual

(Web UI name)
URL
Set Password

LED Settings

By default, the LEDs are on because they are status indicators. You can log in to the gateway
and turn the LEDs off and on.
To turn the LEDs off and on:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
5. Beside LED, select On or Off as desired.)
6. Click Submit.

Login Settings

You can customize the URL that you use to log in to the gateway and you can change the
administrator password.

Change the Gateway URL

You may want to change the URL for the gateway to something more memorable.
To change the URL:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
5. In the URL field (in the Homepage section), type the new value (maximum 31 letters
and numbers).
Gateway Settings
The URL used to show the homepage. See
Changing the Gateway's
The password used to show the homepage. See
Changing the Password.
URL.
57