Quick Exit - Honeywell LYNX User Manual

SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES
Arming the System
Arming the System with no delay (Instant)
Use "Instant" with Stay mode when you are staying home and do not expect anyone to use
the entrance door.
Use "Instant" with Away mode when the premises will be vacant for extended periods of time
such as vacations, etc.
When armed with "Instant", the control beeps twice, or beeps continuously if exit warning
has been programmed for your system, and displays the "Armed Stay Instant" or "Armed
Away Instant" message. The red ARMED indicator lights and the system announces "Armed
Stay Instant –exit now" or "Armed Away Instant –exit now".
When armed with "Instant", the system will sound an alarm if a protected door or window is
opened, including the entrance door. You may leave through the entrance door during the
exit delay period without causing an alarm, but an alarm will sound as soon as someone
reenters.
To arm the system with no delay (Instant)
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010

Quick Exit

If active, you can restart the exit delay at any time after arming has been armed in Stay or
Away mode by selecting the "Quick Exit" icon. This avoids having the user disarm then re-
arm the system after allowing someone to enter or exit. The system will re-arm once the exit
delay expires.
Armed: Stay
Disarm Quick Exit
10:18 AM June 8, 2010
Zones System
Message Phone
More
5000-100-006-V0
Zones System
Phone
Message
More
5000-100-060-V0
– 22 –
1. Select the "Delay" tab on the home screen.
The icon will 'toggle" and "Instant" will be
displayed.
2. Arm the system in the "Stay" or Away" mode
normally.
Note: The entry delay time is eliminated when
"Instant" is selected.
1. Select the "Quick Exit" icon to restart the exit
delay.
Note: Quick Exit is active in Away mode when : Auto
Stay mode is enabled and no entry/exit zone
has been faulted during the exit delay period.