Call Channel Operation; I Call Channel Selection; I Call Channel Transferring - Icom IC-208H Instruction Manual

I Call channel selection

Call channel is pre-programmed memory channel that can be
accessed by simply pushing call channel button.
➥ Push [M/CALL•PRIO] several times to select the call chan-
nel mode then push [BAND] to select the desired call
channel.
• "C1" or "C2" appears instead of memory channel number indi-
cation.
• Push [M/CALL•PRIO] several times to select memory mode, or
push [V/MHz•SCAN] to select VFO mode.
[M/CALL•PRIO]
➥ Push [MR/CALL] for 1 sec. to select the call
MR/CALL
channel mode then push [Y]/[Z] to select the
desired call channel in the main band.
• Push [
MR/CALL
[VFO/LOCK] to select VFO mode.
✔INFORMATION

CALL CHANNEL OPERATION

"C1" or "C2" appears
] to select memory mode, or push
When the VFO mode is
selected from the call channel,
a small "c" appears instead of
memory channel number.

I Call channel transferring

q Push [M/CALL•PRIO] several times then push [BAND] to
select the desired call channel.
• "C1" or "C2" appears.
w Push [S.MW•MW] then rotate [DIAL] to select the memory
channel to transfer the contents.
• "!" indicator and memory channel number blink.
• To transfer to the VFO, select "-- -- --" with [DIAL] then push.
e Push [M/CALL•MW] for 1 sec. to transfer the contents.
z Push [MR/CALL] for 1 sec. then push [BAND]
MR/CALL
to select the desired call channel.
x Push [FUNC], [
push [Y]/[Z] to select the memory channel to
MW
transfer the contents.
• To transfer to the VFO, push [Y]/[Z] to select
"-- -- --".
[Y]/[Z]
c Push [FUNC], then [
transfer the contents.
BAND
6
A(MW)] momentarily, then
CLR
A(MW)] for 1 sec. to
CLR
5
6
38