I Memory Bank Setting - Icom IC-208H Instruction Manual

I Memory bank setting

q Push [M/CALL•PRIO] several times to select memory
mode, then select the desired memory channel via [DIAL].
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [S.MW•MW] several times until
"BAK" appears.
[SET•LOCK]
r Rotate [DIAL] to select the desired bank to be set.
t Push [V/MHz•SCAN] to exit set mode.
[
SET
Bank's initial blinks
MEMORY OPERATION
z Push [MR/CALL] then select the desired mem-
ory channel via [Y]/[Z] or keypad.
B
x Push [
B(D-OFF)] to enter set mode.
SET
c Push [
B(D-OFF)] or [
SET
times until "BAK" appears.
v Push [Y]/[Z] to select the desired bank to be
set.
b Push [
A(MW)] to set the channel into the
CLR
bank and exit set mode.
5
5
C(T-OFF)] several
ENT
36