Icom IC-208H Instruction Manual page 74

11
OTHER FUNCTIONS
D D Scan resume timer
Selects scan resume timer from SCT-15 (default), SCT-10,
SCT-5 and SCP-2.
• SCT-15/10/5 : Scan pauses for 15/10/5 sec., then re-
• SCP-2 : Pause on a signal until signal disap-
D D Channel skip setting
Sets channel skip setting from ON and OFF for memory skip
scan operation.
This item appears when set mode is accessed from memory
mode only.
• Default setting
59
sumes.
pears, then resumes 2 sec. after the sig-
nal disappears.
• "~" or "P ~" appears
when set to "ON."
D D Memory name setting
Sets memory name setting from ON (appear) and OFF (not
appear; default) for memory name appearance.
This item appears when set mode is accessed from memory
mode only.
D D Memory bank setting
Sets the desired memory bank (A to J and OFF) to assign the
regular memory channels.
This item appears when set mode is accessed from memory
mode only.