Icom IC-208H Instruction Manual page 77

D D Key-touch beep
The key-touch beep can be turned OFF for silent operation.
D D Time-out timer
To prevent accidental prolonged transmission, etc., the trans-
ceiver has a time-out timer. This function cuts a transmission
OFF after 1–30 min. of continuous transmission. This timer
can be cancelled.
• TOT-OF : The time-out timer is turned OFF.
• TOT-3/5/15/30 : The transmission is cut OFF after the
set period elapses.
OTHER FUNCTIONS
D D Auto repeater
The auto repeater function automatically turns ON or OFF the
duplex operation with a specified shift direction and tone en-
coder, when the operating frequency falls within or outside of
145.200–145.495, 146.610–146.995, 147.000–147.395,
442.000–444.995, and 447.000–449.995 MHz range. The off-
set and repeater tone frequencies are not changed by the
auto repeater function, reset these frequencies, if necessary.
• OF : The auto repeater function is turned OFF.
• R1 : Activates for duplex only.
• R2 : Activates for duplex and tone.
D D Auto power OFF
The transceiver can be set to automatically turn OFF after a
specified period with a beep when no key operations are per-
formed.
30 min., 1 hour, 2 hours and OFF can be specified. The spec-
ified period is retained even when the transceiver is turned
OFF by the auto power OFF function. To cancel the function,
select "OF" in this set mode.
11
U.S.A. version only
11
62