Audio/Usb Board - HP Pavilion 13 Maintenance And Service Manual

Audio/USB board

Description
Audio/USB board (includes audio jack, cable, and USB port)
Before removing the audio/USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the audio/USB board:
1. Release the ZIF connector (1) to which the audio/USB board cable is attached, and then
disconnect the audio/USB board cable from the system board.
2. Detach the audio/USB board cable (2) from the battery. (The audio/USB board cable is attached
to the battery with double-sided adhesive.)
3. Disconnect the speaker cable (3) from the audio/USB board.
4. Remove the Phillips PM2.4×5.7 screw (4) that secures the audio/USB board to the bottom cover.
5. Lift the right edge of the audio/USB board (5) and swing it up until it rests at an angle.
40 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
Spare part number
768045-001
29).
35).