TouchPad
Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the TouchPad:
1.
Turn the keyboard/top cover upside down with the front toward you.
2.
Remove the two Philllips PM1.9×2.4 broad head screws (1) that secure the TouchPad to the
keyboard/top cover.
NOTE:
in the keyboard/top cover.
3.
Remove the TouchPad and cable (3) by releasing them from the top surface of the keyboard/
top cover.
Reverse this procedure to install the TouchPad.
When removing the TouchPad, make sure the cable is released through the opening (2)
Keyboard/top cover on page
Component replacement procedures
Spare part number
768008-001
29).
33