Display Assembly - HP Pavilion 13 Maintenance And Service Manual

Remove the speakers:
1. Disconnect the speaker cable (1) from the audio/USB board.
2. Release the speakers cables from the retention clips (2) built into the bottom cover.
3. Remove the two Phillips PM2.4×5.7 screws (3) that secure the right speaker to the bottom cover.
4. Remove the speakers (4).
Reverse this procedure to install the speakers.

Display assembly

NOTE:
The display assembly is spared at the subcomponent level only. For display assembly spare
part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Keyboard/top cover on page
Battery on page
Component replacement procedures
29).
35).
43