Usb/Audio Board - HP Envy x360 Maintenance And Service Manual

To install the speakers, reverse this procedure.

USB/audio board

To remove the USB/audio board, use this procedure and illustration.
Table 5-6 USB/audio board description and part number
Description
USB/audio board
USB/audio board cable
Before removing the USB/audio board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the USB/audio board:
1. Remove the tape (1) from the connector on the USB/audio board.
2. Disconnect the cable from the ZIF connector (2) on the board.
3. Remove the two Phillips M2.0 × 3.0 screws (3) from the board.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 30).
Spare part number
N86630-001
N86635-001
Battery on page 31).
30).