HP Pavilion 13 Maintenance And Service Manual page 38

Before removing the disassembling, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
NOTE: When replacing the keyboard/top cover, be sure that the TouchPad assembly (see
on page 33) and power button board (see
defective keyboard/top cover and installed on the replacement keyboard/top cover:
Remove the keyboard/top cover:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3. Remove the two screw covers (1) from the rear edge of the computer.
4. Remove the two computer rear feet (2).
5. Remove the two screw covers (3) from the middle of the computer.
The screw covers and the computer rear feet are included in the Rubber Kit, spare part number
768044-001.
30 Chapter 5 Removal and replacement procedures
Power button board on page
TouchPad
34) are removed from the