Usb/Audio Board - HP Pavilion x360 m3 Series Maintenance And Service Manual

Reverse this procedure to install the hard drive or solid-state drive mounting bracket.

USB/Audio board

NOTE: The USB/Audio board spare part kit does not include the cable. The USB/Audio board cable is
available using spare part number 856007–001.
Description
USB/Audio board
IMPORTANT:
and replacement
Before removing the audio board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard top cover (see
Remove the USB/Audio board:
1. Release the ZIF connector (1) to which the power connector cable is attached, then disconnect the
power connector cable from the USB/Audio board.
2. Release the ZIF connector (2) to which the system board cable is attached, then disconnect the system
board cable from the USB/Audio board.
3. Remove the two Phillips 2.0×4.7 screws (3) securing the USB/Audio board to the base enclosure.
Make special note of each screw and screw lock size and location during removal
Keyboard/top cover on page
Spare part number
856016–001
33).
Component replacement procedures 45