Table of Contents
Advertisement
3.
Use a tool to release the battery from the computer (3).
To install the RTC battery, reverse this procedure.
USB/audio board
To remove the USB/audio board, use this procedure and illustration.
Table 5-6
USB/audio board description and part number
Description
USB/audio board
USB/audio board cable (included in Cable Kit)
USB/audio board bracket (in Bracket Kit)
Before removing the USB/audio board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the USB/audio board:
1.
Disconnect the two cables from the ZIF connectors on the USB/audio board (1).
2.
Remove the two Phillips M2.0 × 4.0 screws (2) that secure the board to the computer, and then remove
the bracket from the board (3).
34
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
28).
28).
Battery on page
29).
Spare part number
N07103-001
N20852-001
N07102-001
Advertisement
Table of Contents
