Heat Sink - HP Pavilion 13 Maintenance And Service Manual

Heat sink

Description
Heat sink (includes replacement thermal material and 4 captive screws, secured by C-clips)
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
following components:
a. Battery (see
b. WLAN module (see
c. Fan (see
d. Speakers (see
e. System board (see
Remove the heat sink:
1. Turn the system board upside down with the front toward you.
2. Loosen the four captive screws (1) that secure the heat sink to the system board.
NOTE:
and system board components, it may be necessary to move the heat sink from side to side to
detach it.
54 Chapter 5 Removal and replacement procedures
Battery on page
WLAN module on page
Fan on page 41)
Speakers on page
System board on page
Due to the adhesive quality of the thermal material located between the heat sink
Keyboard/top cover on page
35)
38)
42)
52)
Spare part number
768022-001
29), and then remove the