Audio/Usb Board - HP Spectre x360 Convertible 13-w000 Maintenance And Service Manual

Audio/USB board

Description
Audio/USB board
Audio/USB board cable for use in 13-w000 – 13-w099 models
Audio/USB board cable for use in 13-ac000 – 13-ac099 models
Before removing the audio/USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Disconnect the battery cable from the system board (see
Remove the audio/USB board:
1. Release the zero insertion force (ZIF) connector (1) to which the cable is attached, and then
disconnect the cable from the audio/USB board.
2. Remove the Phillips PM2.0×2.5 screw (2) that secures the audio/USB board to the computer.
3. Remove the audio/USB board from the computer (3).
Reverse this procedure to install the audio/USB board.
Spare part number
907336-001
907331-001
920127–001
Battery on page 26).
Audio/USB board 31