3.
Remove the speakers from the computer (3).
Reverse this procedure to install the speakers.
USB/audio board
To remove the USB/audio board, use this procedure and illustration.
Table 5-8
USB/audio board description and part number
Description
USB/audio board
USB/audio board cable
Before removing the USB/audio board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the left speaker (see
Remove the USB/audio board:
1.
Disconnect the cable from the ZIF connector on the board (1).
2.
Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
Speakers on page
37).
27).
Spare part number
M52695-001
M16620-001
27).