Setting the Alarm Function
Four types of alarms can be set in the CareSens N Voice Meter: one
post-meal alarm (PP2 alarm) and three time set alarms (alarm 1 - 3).
The PP2 alarm goes off 2 hours after setting the alarm. The alarms
ring for 15 seconds and can be silenced by pressing ▲, ▼ or S
button or by inserting a test strip.
Setting the Post-meal Alarm (PP2 alarm)
Step 1
Setting the PP2 alarm On
Without inserting a test strip,
press and hold the ▲ button
for 3 seconds to set the post-
meal alarm. PP2, the
symbol
and On will be displayed. If the
talking function is on, the meter
will say "Post-meal alarm is on."
The screen will then automatically change to the memory
check mode. At this time, the
alarm has been set, will be displayed on the screen.
Step 2
Setting the PP2 alarm OFF
To turn off the PP2 alarm, press
and hold the ▲ button for 3
seconds. PP2, the
symbol
and OFF will appear on the
screen. If the talking function is
on, the meter will say "Post-meal
alarm is off." Then the screen
will change automatically to the
memory check mode without
38 www.i-sens.com
symbol, indicating that the PP2
icon vanishes
symbol being displayed.
Setting the Time Alarms (alarm 1 - 3)
Step 1
Without inserting a test strip, press ▲ and the S
button simultaneously for 3 seconds to enter the
time alarm mode. While OFF blinks on the screen,
alarm 1 will be displayed. If the talking function is
on, the meter will say "Set alarm one."
Step 2
On pressing ▼, alarm 1 is set and On is displayed
on the screen. Press ▼ again to cancel alarm 1.
OFF will blink on the screen.
Step 3
Press ▲ to adjust the time of alarm 1.
A number representing the time will blink on
the screen. Press ▼ to set the time. Press ▲ to
set the minute.
www.i-sens.com 39