Setting The Alarm Function; Setting The Post-Meal Alarm (Pp2 Alarm); Setting The Time Alarms (Alarm 1-3) - i-SENS CareSens N Voice Owner's Booklet

Setting the Alarm Function

Four alarms can be set in the CareSens N Voice Meter: one post-
meal alarm (PP2 alarm) and three time set alarms (alarm 1-3). The
PP2 alarm goes off 2 hours after setting the alarm. The alarms
ring for 15 seconds and can be silenced by pressing the ▲, ▼ or
S button or by inserting a test strip.

Setting the Post-meal Alarm (PP2 Alarm)

Step 1 Setting the PP2 Alarm On
Without inserting a test strip,
press and hold the ▲ button for
3 seconds to set the post-meal
alarm. "PP2", the symbol and
"On" will be displayed. If the
talking function is on, the meter
will say "Post-meal alarm is on. "
The screen will then automatically change to the memory check
mode At this time, the symbol, indicating that the PP2 alarm
has been set, will be displayed on the screen.
Step 2 Setting the PP2 Alarm OFF
To turn off the PP2 alarm, press
and hold the ▲ button for 3
seconds. "PP2", the symbol and
"OFF" will appear on the screen.
If the talking function is on, the
meter will say "Post-meal alarm is
off. " Then the screen will change
automatically to the memory
check mode without the
42 www.i-sens.com
symbol disappears
symbol displayed.

Setting the Time Alarms (Alarm 1-3)

Step 1
Without inserting a test strip, press the ▲ and
S buttons simultaneously for 3 seconds to
enter the time alarm mode. "alarm 1" will be
displayed while "OFF" blinks on the screen. If
the talking function is on, the meter will say
"Set alarm one. "
Step 2
On pressing ▼, "alarm 1" is set and "On"
is displayed on the screen. Press ▼ again
to cancel "alarm 1" and "OFF" will blink on the
screen.
Step 3
Press ▲ to adjust the time of "alarm 1". A
number indicating the hour will blink on
the screen. Press ▼ to set the hour. Press ▲
to end.
www.i-sens.com 43