Setting The Alarm Function; Setting The Post-Meal Alert (Pp2 Alert) - i-SENS CareSens Dual User Manual

Setting the Alarm Function

Four types of alarms can be set in the CareSens Dual meter: one
post-meal alert (PP2 alert) and three time set alarms (alarm 1–3).
The PP2 alert goes off 2 hours after setting the alert. The alarms
ring for 15 seconds and can be silenced by pressing any button
or by inserting a test strip.

Setting the Post-meal Alert (PP2 alert)

Step 1 Turning the PP2 alert On
Without inserting a test strip,
press and hold the
3 seconds to set the post-meal
alert.
'PP2', bell ( ) symbol and 'On'
will be displayed. The screen will
then automatically change to the
memory recall mode. At this
time, bell ( ) symbol, indicating that the PP2 alert has been set,
will be displayed on the screen.
Note:
The PP2 alert will automatically turn off if the meter's time
setting is adjusted to more than two hours before or just past
the currently activated PP2 alert time.
Step 2 Turning the PP2 alert OFF
To turn off the PP2 alert, press
and hold the button for
◀
3 seconds. 'PP2', bell (
and 'OFF' will appear on the
screen. Then the screen will
change automatically to the
memory recall mode without
bell ( ) symbol displayed.
button for
◀
) symbol
' ' disappears
www.i-sens.com 53