Inserting or Replacing the Batteries
The CareSens N Voice Meter uses two AAA alkaline batteries.
Before using the meter, check the battery compartment and
insert batteries if empty.
When the
symbol appears on the display while use, the
batteries should be replaced as soon as possible.
The test results may not be saved if the batteries run out
completely.
Step 1
Make sure the meter is turned off. Press
firmly on the battery cover and slide
in the direction of the arrow. And then
swing it open.
Step 2
Remove the used batteries and insert
the two new batteries. Close the battery
cover firmly.
Note:
Removing the meter batteries will not affect your
stored results. However you may need to reset your meter
settings. See page 13.
8 www.i-sens.com
CareSens N Single Blood Glucose Test Strip
The CareSens N Voice Blood Glucose Monitoring System
measures blood glucose quickly and accurately. It automatically
absorbs the small blood sample applied to the narrow edge of
the strip.
Contact bars
Gently push the test strip, with its
contact bars facing up, into the test
strip port of meter
Insert
Confirmation window
Check here to see whether sufficient
blood sample has been applied
Edge to apply blood sample
Apply blood sample here for testing
Important Safety Instruction
• All components that come into contact with blood
samples should be considered to be biohazards capable of
transmitting viral diseases, even after disinfection.
• Do not share the meter or lancing device with another
person.
• The CareSens N Single Test Strip should be used only with
fresh capillary whole blood samples.
www.i-sens.com 9