Viewing Test Results Stored In The Memory; Setting The Alarm Function; Setting The Post-Meal Alarm (Pp2 Alarm) - i-SENS CareSens N Owner's Booklet

Viewing Test Results Stored in the Memory

Step 1
Press any button to turn the meter
on. The current date and time will be
displayed on the bottom of
the screen followed by the 1 day
average value and the number of
the test results saved within the
current day.
Step 2
Use the button to scroll
through the test results,
starting from the most
recent and ending with
the oldest. Press the
button to return to the
results seen previously.
After checking the stored
test results, hold the S
button to turn off the meter.
44 www.i-sens.com
The number of
tests within
the current day
button
button

Setting the Alarm Function

Four types of alarms can be set in the CareSens N NFC Meter:
one post-meal alarm (PP2 alarm) and three time set alarms
(alarm1-3). The PP2 alarm goes off 2 hours after setting the
alarm. The alarms ring for 15 seconds and can be silenced by
pressing any button or by inserting a test strip.

Setting the Post-meal Alarm (PP2 alarm)

Step 1 Setting the PP2 Alarm On
Without inserting a test strip,
press and hold the button for
3 seconds to set the post-meal
alarm. 'PP2' , bell ( ) symbol and
'On' will be displayed. The screen
will then automatically change
to the memory check mode.
At this time, bell ( ) symbol,
indicating that the PP2 alarm has been set, will be displayed on
the screen.
Step 2 Setting the PP2 Alarm OFF
To turn off the PP2 alarm, press
and hold the button for 3
seconds. 'PP2' , bell ( ) symbol
and 'OFF' will appear on the
screen. Then the screen will
change automatically to the
memory check mode without
bell ( ) symbol displayed.
disappears
www.i-sens.com 45