Setting Up Your System; Adjusting Language, Date, Time And Sound - i-SENS CareSens N Voice User Manual

CareSens N Voice Meter Display
01
has been set
01 02 03
02
stored in the memory are displayed
04
03
solution testing and when the control
solution test results are displayed
05
04
07 08 09 10
displayed here
06
12
11
05
meter is ready for the application of a
drop of blood or control solution
13 14
06
when the temperature is displayed
Post-meal test flag:
appears when post-meal testing and
07
when post-meal test results are displayed
Hypoglycemia symbol:
08
below the hypoglycemic level
Post-meal alarm symbol:
09
alarm has been set
Mute symbol:
appears only when the sound is set to OFF
10
Battery symbol:
indicates meter batteries are running low
11
and need to be replaced
mg/dL, mmol/L:
unit for measuring blood glucose
12
Date / temperature
13
Time
14
Note: The unit of measurement for your CareSens N Voice
Meter is preset and fixed in mg/dL.
12 www.i-sens.com
alarm:
appears when the time alarm
mem:
appears when test results
ctl:
appears during the control
Test results:
test results are
Blood insertion symbol:
indicates
Temperature symbol:
appears
appears when the test result is
appears when the post-meal

Setting up Your System

You should check and update the meter-settings such as time
and date before using your meter or when you change the meter
batteries.
Press and hold the S button for 3 seconds to enter the SET mode.
While you are setting the meter, current settings appear on the
display. The meter will also announce each function when the
talking function is on. Press and hold ▲ or ▼ to scroll faster.
Whenever you want to complete the setting and exit from the SET
mode, press and hold the S button for 3 seconds again.

Adjusting Language, Date, Time and Sound

Step 1 Entering the SET Mode
Press and hold the S button for 3 seconds. After
all the segments flash across the screen, SET is
displayed on the screen. If the talking function
is on, the meter will say "Set meter." Press the S
button again to select a language.
Step 2 Selecting a Language
The meter has a bilingual talking
function that can be used as a verbal
aid for using the meter and hearing
test results. When you enter the
language selection mode for the first
time, L1 will be blinking and the meter
will announce "Language Selection" in
the default language English. To select
another language (L2, Spanish), press
▲ or ▼ button. Press the S button to
confirm the language and set the year.
www.i-sens.com 13