Table of Contents
Advertisement
Settings
Adjustment of time (voice-day-and-time-stamp)
The time function allows the indication and recording of date and time of all recorded
ICMs or notes. The acoustic day and time indication can also be used as information
of the current time.
Time check
The device is in the stand-by mode.
•
Press the key ➃ delete.
•
The device indicates the current day and time in the following order:
<day> <hour> <minute>.
Time setting
•
In order to set the exact day and time, keep the key ➃ delete pressed. The day
will be announced.
•
After the announcement of the day, press the key ➄ on/off
back . Meanwhile, keep the key ➃ delete pressed. The day will be announced.
If the correct day has been found, release the key ➃ delete. The set day will be
announced.
•
Now, press the key ➃ delete again and you can hear the announcement of the
hour. Keep the key ➃ delete pressed and operate the key ➄ on/off
➅ playback
the key ➃ delete and the set hour will be announced.
•
Now press the key ➃ delete again. The minutes will be announced. Proceed as
described above until the requested minutes are announced.
•
Release the key ➃ delete now and the programmed setting will be announced:
<day> <hour> <minutes>.
as long as the requested hour is announced. Afterwards, release
Settings
12
or the key ➅ play-
or the key
Advertisement
Table of Contents
