Settings; Programmable Parameters - TIPTEL 332 CLIP Operating Instructions Manual

Settings

Programmable parameters

Language ............................... German, English, French, Italian or Dutch.
Time ........................................ Here, you can set the time.
Date ........................................ Here, you can set the date (day, month, year).
Voice-day-and-time-stamp ... On or Off. If you select "on", the day and time be-
Network time ........................ On or Off. If your telephone network or your PABX
Length of incoming ...............
messages
Recording quality .................. Level 1 or 2, whereas level 2 has the highest re-
Ringing tones ........................ 2 to 9 ringing tones. This is to set the number of
Remote control code ............ The remote control code consists of 1 to 4 digits
Remote pre-interrogation ..... Yes or no. If you selected "yes", and new incoming
Settings
longing to the ICM are indicated at the end of each
message.
transmits the time, it can be adopted by the internal
clock (the year is not transmitted and has to be set
manually).
1 to 5 minutes or endless. Here, you can limit the time
a caller has at his disposal to speak a message.
cording quality. An increasing recording quality
means a decrease of available recording time. Level
1 corresponds to about 50 minutes and level 2 about
25 minutes recording time.
ringing tones until the answering machine picks up.
ranging from 0 to 9999. The code "-" is used to
deactivate the remote control.
messages exist, your tiptel 332 CLIP will pick up after
2 ringing tones (regardless of your settings for the
number of ringing tones). If no new incoming
messages exist, the device picks up after the number
of ringing tones according to your settings. Thus, you
can identify whether new messages have been re-
corded or not and whether a remote interrogation
needs to be performed or not.
10