Specifications - Hd 17T21 Mmd-Xxx-Fxxx - Hatteland HD 12T21 User Manual

Series x - maritime multi display
Hide thumbs Also See for HD 12T21:
Table of Contents

Advertisement

Specifications - HD 17T21 MMD-xxx-Fxxx

SPECIFICATIONS
TFT Technology:
• High Quality TFT with LED Backlight
• 17.0 inch viewable image size, Aspect Ratio 5:4
• TFT active-matrix liquid crystal panel
TFT Characteristics:
• Native Resolution
: 1280 x 1024
• Pixel Pitch (RGB)
: 0.264 (H) x 0.264 (V) mm
• Response Time
: 5ms (typical), "black" to "white"
• Contrast Ratio
: 1000:1 (typical)
• Light Intensity Standard
: 350 cd/m² (typical)
• Light Intensity High Bright : 1000 cd/m² (typical)
• Viewable Angle
: +/- 80 deg. (typical) (Up/Down/Left/Right)
• Active Display Area
: 337.92 (H) x 270.336 (V) mm
• Max Colors
: 16.7 million
Synchronization:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects VGA -> SXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal
: 31.5 kHz to 91.1 kHz
• Vertical
: 60 Hz* to 85 Hz
* Recommended for optimal picture quality
Supported Signals:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024*
* Recommended for optimal picture quality
Video Signals:
• Interlaced HDTV, NTSC, PAL and SECAM video
• Composite video
Power Specifications:
Multi-power Supply:
• 115&230VAC - 50/60Hz + 24 VDC
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
• Operating Standard
• Operating High Bright
For a full overview of typenumbers, please review the following link:
www.hatteland-display.com/pdflink/ind100780-3.php
Compass Safe Distance: HD 17T21 MMD-xxx-Fxxx
IEC 60945 4th (EN 60945:2002)
GL - Germanischer Lloyd
CCS - China Classification Society (Pending)
IND100129-144
Please visit www.hatteland-display.com for the latest electronic version.
- HD 17T21 MMD-Mxx-Fxxx
: 32W (typ) - 60W (max)
: TBD W (typ) - 60W (max)
Standard: 125cm
A P P R O V A L S
This product have been tested / type approved by the following classification societies:
IACS E10
DNV - Det Norske Veritas
BV - Bureau Veritas
Note: All specifi cations are subject to change without prior notice!
All specifications are subject to change without prior notice!
Physical Considerations:
• 390.00 (W) x 351.00 (H) x 73.50 (D) mm
• 15.35" (W) x 13.82" (H) x 2.89" (D)
• 4 x M6 VESA mounting 280x150mm, Max 12mm deep
• Weight: 6.2kg / 13.6lbs
Signal Terminals:
• DVI-D Signal IN
• RGB Signal IN
• Comp. Video IN
• SCOM RS-422/485 : 1 x Phoenix Terminal Block 3.81, non-isolated+Buzzer
• RGB Signal OUT
• If Touchscreen
• Ethernet
• SCOM RS-232
• Potmeter
• AC Power IN
• DC Power IN
*Tested at recommended resolutions. The RGB output signal is at same resolution and
sync as the RGB input. The output is working even if the display unit is turned off, but
power cable/supply must be connected/provided.
User Controls:
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, On Screen Display Menu, Brightness Control (-/+)
• Hotkeys (left/right), Mode Status Indicators (ECDIS, Service)
• Buzzer (not visible), Light Sensor (not visible)
Environmental Considerations:
• Operating
• Storage
• IP Rating
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:
• HD CMB SX1-A1
• HD 17BRD SX1-A1 = 1 x Mounting Bracket
• HD TMB SX1-B1
Please see user manual/datasheet for more information
Factory Options:
• Projected Capacitive Touch Screen (Multitouch, USB interface)
• Optical Bonding Technology
• Sunlight Readable / High Bright (includes Optical Bonding) model
• Color Calibrated models (ECDIS)
* Release date to be con rmed. Please contact us for more information.
Steering: 75cm
& C E R T I F I C A T E S
ClassNK - Nippon Kaiji Kyokai (Pending)
ABS - American Bureau of Shipping
LRS - Lloyd's Register of Shipping (Pending)
60
: 2 x 24p DVI (female)
: 2 x 15p HD D-SUB (female)
: 3 x BNC Connector (female)
: 1 x 15p HD D-SUB (female) - Clone of RGB IN*
: 1 x USB TYPE A Connector (female)
: 1 x RJ45 Connector for Remote Control
: 1 x 9p D-SUB (female) non-isolated
: 1 x 9p D-SUB (male)
(Potentiometer IN, +5VDC OUT, BRT +/- IN)
: 1 x Std IEC Inlet
: 1 x 2p Phoenix MSTB 2,5/2-GF-5,08 THT
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
: Protection: IP66 front - IP22 rear (EN60529)
= 1 x Console Mount Kit
= 1 x Table Mount Bracket. EN60945
Tested*
2/2

Advertisement

Table of Contents
loading

Table of Contents