Table of Contents
Advertisement
User Controls
Action Indicators:
SERVICE
= Built in functionality to determine when the unit requires service in order to perform within preset
factory standards. This area will illuminate constantly until the unit is powered off.
Note that by touching this symbol no action will be performed or has been assigned.
Brightness Adjust:
Brilliance / Brightness adjustment of the displayed image is adjusted by touching the (-) or (+) illuminated symbols.
The entire area of text and symbols are visible as long as the unit is powered. Note that only the (-) and (+) are touch
sensitive while the "*" and "BRILLIANCE" symbols are not. The symbols (-) and (+) are also used to change values in
the OSD menu when its activated / function selected for adjusting.
ECDIS Status / Indicator: (optional factory standard)
For units that has been factory ECDIS calibrated the text "ECDIS" will illuminate in green constantly as long as the
unit is powered. The "+" and "-" symbols will illuminate in red when the Brightness/Brillance is adjusted either above or
below ECDIS factory calibration point.
To be able to stay within ECDIS calibrated range, please assure that both the "+" and "-" are not illuminated and that
"ECDIS" text remains illuminated during operation. Note that by touching these symbols no action will be performed or
has been assigned.
Note: ECDIS functionality is only suitable for models above 15 inch.
Light Sensor:
Used to sense level of ambient light in the surrounding environment. The sensor data can be read by suitable software
through the Hatteland Display SCOM functionality of the unit and thus can be used to control brightness remotely.
Note: This sensor is not visible for the eye or has any illumination behind to indicate it's position. Further, by touching
or covering this area will naturally make the sensor data inaccurate.
Note:
In the following "On Screen Display (OSD)" menu chapter, these buttons are referenced as:
"MENU"
"(-) Brilliance (+)"
"(<) Navigation (>)"
Operation
IND100064-40
27
Advertisement
Table of Contents
