Table of Contents
Advertisement
OSD Menu Functions
Service
Will show various technical and unit related information, such as; Firmware versions, Elapsed Time,
Internal Temperature, Fault Status and activation for the internal Test Pattern image useful for trouble-
shooting. Some of these functions are static information while others are accessible. Whenever you are in
contact with helpdesk or service personnel, they might require you to read back some of these values in
order to precisely pinpoint any problem/question you should have with the unit or its functionality.
Information blocks as follows:
"GEV Firmware Rev"
"CYP Firmware Rev"
"Ethernet Firmware Rev"
"Elapsed Time"
"Current Temperature"
Service
- Fault Status
|---2---
Will show detected Fault Staus by measuring various internal values for "DVI Chip", "NVRAM",
"DDC" and "TMP Sensor" during operation. Status is stated as either "OK" or "FAULT". The contents
of this submenu is listed below.
Fault Status as follows:
"DVI Chip"
"NVRAM"
"Ethernet"
"GDC"
"TMP Sensor"
User Controls
IND100064-38
= Displays the firmware version of the GEV videocontroller.
Example: "GEVHD-24 120120V2"
= Displays the firmware version of the touch enabled buttons.
Example: "120119R0V01"
= Displays the firmware version of the Ethernet controller.
Example: "E121003V1"
= Shows the time elapsed in hours since first-time power on.
Example: "180"
= Shows the internal temperature measured by onchip sensor.
Example: "+027.0 C", in Celcius Degrees.
= Status for on-board Digital Visual Interface graphics chip processor.
= Status for Non-volatile random-access memory,
used to store parameters and settings.
= Status for Ethernet/LAN communication chip controller.
= Status for Glass Display Control™ (GDC) touch button controller.
= Status for internal temperature measured by on-chip sensor.
54
Advertisement
Table of Contents
