Hatteland HD 12T21 User Manual page 37

OSD Menu Functions
Image Settings
|---2---
Allows to adjust/shift the main color properties of all Red, Green, Blue and Yellow (unique hues)
values. This can be useful for certain Composite Video sources (no effect on DVI/VGA signals)
whose output may have shifted or seems to be "out of phase", where for instance blue seems more
dominant than green, red and yellow-ish colors. By using HUE one can shift the entire color range
of all components left or right in the spectrum.
● Note: Value adjustable from 0 to 100. 50 is factory default.
Image Settings
|---2---
Increase/decrease the overall image sharpness. This affects the active display area, and applies to
all signal inputs and window overlays (PIP/PBP). Use it to increase the visual quality of signals from
possible older equipment or improve electronically weak signals.
● Note: Value adjustable from 0 to 24. 12 is factory default. Available for RGB/VGA, CVBS modes only.
Image Settings
|---2---
Allows to adjust DVI/VGA signals Horizontally (left/right) and Vertically (up/down) within the TFT
panel Active Area. If the incoming signal is "Analog VGA 1 (RGB/VGA)" only, Clock and Phase can
also be adjusted (if there seems to be a "waterfall / rolling bars" effect present in the active display
area).
● Note: This function can move information in the image outside the visible TFT Active Area, so use caution when
modifying this parameter. Try to determine the max end of borders (look at each corner) of the image before you
proceed using this function.
Image Settings - Display
|--------3--------
Settings as follows:
Image Settings - Display
|--------3--------
Settings as follows:
User Controls
IND100064-38
- Hue
- Sharpness
- Display
"H Position" = Move image within the TFT panel active area Horizontally (left/right),
values from 0 to 100.
● Note: Default value is centered inside the active TFT panel area.
"V.Position" = Move image within the TFT panel active area Vertically (up/down),
values from 0 to 100.
● Note: Default value is centered inside the active TFT panel area.
*Available in "Full Mode" only + Video Fullscreen
- H Position
- V Position
37