To The Purchaser - Hiniker C-PLOW 8801 Operator's Manual

2

To The Purchaser

This product is designed and manufactured to
give years of dependable service when properly
maintained and used for the purpose for which it
is intended. Never allow anyone to operate this
equipment until they fully understand the complete
contents of this manual. It is the responsibility of
owners who do not operate this equipment to en-
sure the operator is properly instructed and under-
stands the contents of this manual. It is also the
owner's responsibility to ensure that anyone op-
erating this equipment is mentally and physically
capable of so doing.
Important information is contained in this manual
to help ensure safe and efficient operation.
If you have any questions about this manual, or the
equipment discussed herein, contact your Hiniker
dealer.
This is a safety alert symbol. It alerts an
operator to information concerning per-
sonal safety. Always observe and heed
these instructions, otherwise death or serious
injury can result.
All references to LEFT or RIGHT are defined as
viewing the plow from the cab of the truck.
Instructions for raising and lowering the plow re-
fer to the joystick controller as received from the
factory. The raise and lower functions may be re-
versed to suit the preference of the operator by
following the instructions on page 26 for switching
the controller joystick and face plate.
This Operator's manual is shipped with this equip-
ment. Contact your Hiniker dealer for additional
copies.
Always obtain original Hiniker service parts. Sub-
stitute parts could adversely affect equipment per-
formance and warranty.
Check that your dealer has forwarded to Hiniker
Company the delivery report form along with the
plow identification number because it helps to
maintain maximum service and warranty benefits.
TO THE PURCHASER
This does not put you on any mailing list, and
information thereon is not available to others.
Your plow's identification number decal is at lo-
cation (1) in the following illustration.
Record the following information for later ref-
erence when obtaining service parts:
____________________________________
Purchase Date
____________________________________
Purchaser's Name
____________________________________
Dealer's Name
____________________________________
Machine Serial No.
DWG NO. 5464