To The Purchaser - Hiniker 7812 Operator's Manual

2

To The Purchaser

This product is designed and manufactured to
give years of dependable service, when properly
maintained and used for the purpose for which it
is intended. Never allow anyone to operate this
equipment until they fully understand the complete
contents of this manual. It is the responsibility
of owners who do not operate this equipment
to ensure the operator is properly instructed
and understands the contents of this manual. It
is also the owner's responsibility to ensure that
anyone operating this equipment is mentally and
physically capable of so doing.
Important information is contained in this manual
to help ensure safe and efficient operation.
If you have any questions about this manual, or
the equipment discussed herein, contact your
Hiniker dealer.
TAKE NOTE! THIS SAFETY ALERT
SYMBOL FOUND THROUGHOUT THIS
MANUAL IS USED TO CALL YOUR
ATTENTION TO INSTRUCTIONS INVOLVING
YOUR PERSONAL SAFETY AND THE SAFETY
OF OTHERS. FAILURE TO FOLLOW THESE
INSTRUCTIONS CAN RESULT IN INJURY OR
DEATH.
THIS SYMBOL MEANS:
- ATTENTION!
- BECOME ALERT!
- YOUR SAFETY IS INVOLVED!
SAFETY SIGNAL WORDS:
DANGER: Indicates an imminently hazardous
situation that, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation that, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation that, if not avoided, may result in minor or
moderate injury, or damage to components.
NOTE: Addresses safety practices not related to
personal safety.
All references to LEFT or RIGHT are defined as
viewing the plow from the cab of the truck.
TO THE PURCHASER
Instructions for raising and lowering the plow refer to
the joystick controller as received from the factory.
The raise and lower functions may be reversed to
suit the preference of the operator by following the
instructions on page 24 for switching the controller
joystick and face plate.
This Operator's manual is shipped with this
equipment. Contact your Hiniker dealer for additional
copies.
Always obtain original
Substitute parts could adversely affect equipment
performance and warranty.
Check that your dealer has forwarded to Hiniker
company the delivery report form along with the plow
identification number because it helps to maintain
maximum service and warranty benefits. This does
not put you on any mailing list, and information
thereon is not available to others.
Your plow's identification number decal is at location
(1) in the following illustration.
Record the following information for later
reference when obtaining service parts:
Purchase Date
Purchaser's Name
Dealer's Name
Machine I.D. No.
Hiniker service parts.
DWG NO. 6066