Hiniker C-PLOW 8801 Operator's Manual page 11

Disconnect Plugs
Disconnect the three electrical connectors by
pulling them straight out from the receptacles.
Do not twist the connectors, twisting will dam-
age the connector pins or the wiring harness.
Turn Off Lights and Power
Back inside the truck, return control of the head-
lights to the truck and switch power off on the
snowplow control box, then slowly back the
truck out from the plow.
NOTE: The stop plate will automatically fall for-
ward as soon as the lift cylinder is fully extend-
ed for raising the blade prior to transporting the
plow.
If the snowplow won't be used for an extended
period of time, the prong weldment can be re-
moved from the truck by removing the hex bolts
that fasten it to the truck mount frame.
DWG NO. 5233
DWG NO. 4164
Operating Procedures 9