To The Purchaser - Hiniker V-PLOW 1851 Operator's Manual

2

To The Purchaser

This product is designed and manufactured to
give years of dependable service when properly
maintained and used for the purpose for which
it is intended. Never allow anyone to operate
this equipment until they fully understand the
complete contents of this manual. It is the re-
sponsibility of owners who do not operate this
equipment to ensure the operator is properly
instructed and understands the contents of this
manual. It is also the owner's responsibility to
ensure that anyone operating this equipment is
mentally and physically capable of so doing.
Important information is contained in this manu-
al to help ensure safe and efficient operation.
If you have any questions about this manual, or
the equipment discussed herein, contact your
Hiniker dealer.
This is a safety alert symbol. It alerts
an operator to information concerning
personal safety. Always observe and
heed these instructions, otherwise death or
serious injury can result.
All references to Left or Right are defined as
viewing the plow from the cab of the truck.
Instructions for raising and lowering the plow
refer to the joystick controller as received from
the factory. The raise and lower functions may
be reversed to suit the preference of the opera-
tor by following the instructions on page 22 for
switching the controller joystick and face plate.
This Operator's manual is shipped with this
equipment. Contact your Hiniker dealer for ad-
ditional copies.
Always obtain original Hiniker service parts.
Substitute parts could adversely affect equip-
ment performance and warranty.
Check that your dealer has forwarded the Hiniker
delivery report form along with the plow identifi-
cation number because it helps maintain maxi-
mum service and warranty benefits. This does
TO THE PURCHASER
not put you on any mailing list, and information
thereon is not available to others.
Your plow's identification number decal is at lo-
cation (1) in the following illustration.
Record the following information for later ref-
erence when obtaining service parts:
Purchase Date
Purchaser's Name
Dealer's Name
Machine I.D. No.
DWG NO. 3712