Operating In Manual Mode; Manual Mode Terminal Pop-Up Window With Action List - IBM Tape Library Magstar 3494 Operator's Manual

Operating in Manual Mode

Figure 143 shows the Manual Mode Terminal pop-up window with the Action List
screen.
Figure 143. Manual Mode Terminal Pop-Up Window with Action List
Legend:
Action
VOLSER
From
To
Device
Rack
?
The Action List screen presents tasks to perform. Perform the actions in the
sequence listed (see Figure 143). Read the following Mount, Demount, Insert, and
Eject procedures for how to perform each action.
The following are the function keys of the Action List screen:
F1
F3
230
Magstar 3494 Tape Library Operator Guide
Select an action. Press Enter to confirm action completion (except Mounts).
Action VOLSER From
Mount WCC007 Rack
Mount WSB392 Rack
Mount TFW001 Device 201
Mount SCR023 Rack
Mount WRO112 Rack
Mount TGB041 Rack
Mount ECR223 Rack
Mount SFC607 Rack
Mount FGG641 Rack
Eject ERV399 Rack
More actions are waiting.
Press the Refresh key (F9) to update the list.
F1=Help F3=HideScreen F4=Error F5=Insert F6=Review F9=Refresh F10=Locate
The operator task. See the following procedures for details.
The cartridge volume serial number.
The place where you should find the cartridge specified in VOLSER.
The place where you should put the cartridge.
The 3490E/3590 tape drive.
The physical storage address that can contain one cartridge.
The cartridge may not be in the location specified. See Note 2.b on
page 232.
Displays instructions for performing Manual mode tasks.
Hides this pop-up window (Manual Mode Terminal). The Manual Mode
Terminal pop-up window is hidden but can be retrieved by selecting the
Mode pull-down and then selecting Manual mode.
Action List
To
12 B 11 Device 3F1
7 C 5 Device 3F0
Device 3F1
12 E 6 Device 3F0
3 J 13 Device 201
4 F 3? Device 200
10 D 13 Device 3F1
9 F 2 Device 3E1
11 C 10 Device 200
13 F 11