Starting Manual Mode; Mode Pull-Down Menu; Mode/State Change Request Pop-Up Window - IBM Tape Library Magstar 3494 Operator's Manual

Note: The display panels shown are examples and may not be exactly the same

Starting Manual Mode

To select Manual mode, perform the following procedures:
1. Select Mode (see Figure 140) from the action bar on the Operator Menu at the
2. Verify that the 3494 is Online. If Offline, choose Online and confirm the
3. Select Manual from the Mode pull-down. See "Manual" on page 101.
Figure 140. Mode Pull-Down Menu
4. Select the Yes push-button (see Figure 141) to start the change to Manual
Figure 141. Mode/State Change Request Pop-Up Window
228
Magstar 3494 Tape Library Operator Guide
as the panels displayed on your library manager display.
library manager. See "Using the Mode Pull-Down" on page 99.
selection. See "Online" on page 101.
mode.
During the change to Manual mode, a wait period allows the library manager, if
possible, to process all operations in progress, park the cartridge accessor and