IBM Tape Library Magstar 3494 Operator's Manual page 168

Ibm magstar 3494 tape library operator guide
Table of Contents

Advertisement

Mount Date
Mounts
Misplaced
Unreadable
Mounted
Inaccessible
Manual mode
Up to five output columns can be selected to be included in the output list. The data
is sorted by the first two output columns. The first column takes precedence over
the second column.
The amount of data contained in the list can be decreased by narrowing certain list
criteria. One or more of the following can be used to refine the data retrieved:
Specific Rack
146
Magstar 3494 Tape Library Operator Guide
E
ECCST, Enhanced Capacity Cartridge System Tape for non-VTS
library
J
HPCT, High Performance Cartridge Tape for non-VTS library
1-1
CST, Logical Cartridge System Tape for VTS 1 library
E-1
ECCST, Logical Enhanced Capacity Cartridge System Tape for VTS
1 library
J-1
HPCT, High Performance Cartridge Tape for VTS 1 library
1-2
CST, Logical Cartridge System Tape for VTS 2 library
E-2
ECCST, Logical Enhanced Capacity Cartridge System Tape for VTS
2 library
J-2
HPCT, High Performance Cartridge Tape for VTS 2 library
List the last date the volume was mounted or inserted.
List the number of times the volume has been mounted.
List if the volume is misplaced.
Zero (0) indicates the volume is not misplaced. One (1) indicates the
volume is misplaced.
List if the volume's label is unreadable.
Zero (0) indicates the volume's label is readable. One (1) indicates the
volume's label is unreadable.
List if the volume is mounted.
Zero (0) indicates the volume is not mounted. One (1) indicates the volume
is mounted.
List if the volume is inaccessible.
Zero (0) indicates the volume is accessible. One (1) indicates the volume is
inaccessible.
List if the volume is was moved during manual mode.
Zero (0) indicates the volume was not moved during manual mode. One (1)
indicates the volume was moved during manual mode.
Select this checkbox if the list output should only include volumes from a
particular rack. Use the associated drop-down list to select which rack to
limit the output to. The drop-down list contains all of the racks in the library.

Advertisement

Table of Contents
loading

Table of Contents