Dual Accessor Zones; Dual Accessor Zones Pop-Up Window - IBM Tape Library Magstar 3494 Operator's Manual

Previously Initialized
The LAN Status panel has the following push-buttons:
OK
Help

Dual Accessor Zones

Figure 79 shows the Dual Accessor Zones window.
Figure 79. Dual Accessor Zones Pop-Up Window
The Dual Accessor Zones window displays a diagram showing the string of frames
that make up the library, and indicators showing which frames are serviced by each
accessor. Boundary is the frame number of the frame that is currently serving as
the zone boundary between Accessor A's work zone and Accessor B's work Zone.
Mode is the boundary mode (fixed or float). Fixed means the boundary is fixed,
and will not change based on activity. Float means that the boundary will change
automatically based on activity to balance the accessor workload. The default mode
is float.
The Dual Accessor Zones window has the following push-buttons:
OK
Help
To close the window, select the OK push-button in the lower left corner of the
window.
136
Magstar 3494 Tape Library Operator Guide
This field indicates if the Library Manager has previously been initialized
with this host via LAN.
v 0 in this field indicates the Library Manager has not yet been initialized
with this host.
v 1 in this field indicates the Library Manager is initialized or was
previously initialized with this host.
Closes the window.
Display the help panel.
Closes the Dual Accessor Zones window.
Provides help about the Dual Accessor Zones window.