IBM Tape Library Magstar 3494 Operator's Manual page 340

|
Table 42. Status Codes and Status Text (continued)
| |
Operation Status
|
| Status Code
|
| 06
|
|
Status Text
|
Exported Stacked Volume not in the Library
|
Probable Cause
|
The Exported Stacked Volume specified in the
|
import list (either with a specific logical volume
|
or for import of all logical volumes) is not in the
| library in which the import operation was
| performed.
|
|
| Status Code
|
| 07
|
| Status Text
|
| Logical volume not found on Exported Stacked
| Volume
|
Probable Cause
| The logical volume specified in the import list is
| not resident on the Exported Stacked Volume
| specified.
|
|
|
Status Code
|
|
08
|
| Status Text
|
| Exported Stacked Volume not in Import category
|
|
| Probable Cause
| Processing for the Exported Stacked Volume not
|
| allowed. The Exported Stacked Volume specified
|
| in the import list is in the library, but is not
|
| assigned to the Import category.
|
|
|
|
|
|
|
|
| Status Code
|
| 09
|
Status Text
|
Logical volume in-use
|
Probable Cause
|
The logical volume could not be exported
|
because the volume specified in the export list
|
was mounted or queued to be mounted when
|
the list was processed as part of the export
| operation.
|
318
Magstar 3494 Tape Library Operator Guide
Resolution Actions
1. Locate the Exported Stacked Volume needed and
insert it into the library.
2. Retry the import operation.
1. Use the tape management system or the TCDB
records to verify that the logical volume is on the
Exported Stacked Volume specified.
2. Correct any errors and retry the import operation.
1. Use the tape management system or TCDB to check
that the specified volume is an Exported Stacked
Volume.
2. If the volume is an Exported Stacked Volume and is
in the Unassigned category, move the volume to the
Import category.
3. If the Exported Stacked Volume is found in the Insert
category, the volume must be moved to the Eject
category and when ejected, it must be reinserted into
the Convenience I/O station and moved into the
Import category.
4. Retry the import operation.
5. If the volume is not found to be an Exported Stacked
Volume, check the source for the Import List Volume
contents.
Retry the export of the volume when it is no longer being
used.