IBM Tape Library Magstar 3494 Operator's Manual page 342

|
Table 42. Status Codes and Status Text (continued)
| |
Operation Status
|
| Status Code
|
| 13
|
Status Text
|
Duplicate volume in library
|
Probable Cause
|
The logical volume could not be imported
|
because it already resides in the library
|
inventory. The library inventory includes logical
| volumes in all VTS subsystems within the same
| physical library and all physical volumes in the
| library.
|
|
| Status Code
|
|
14
| Status Text
| Duplicate volume in Enterprise
|
Probable Cause
| The logical volume could not be imported
| because the attached hosts determined that it
| already resides in another library.
|
|
|
Status Code
|
|
15
|
| Status Text
|
| Library full
| Probable Cause
| The logical volume could not be imported
| because the library has reached the maximum
| number of logical volumes it can support.
|
|
|
Status Code
|
|
16
|
| Status Text
|
| Stacked Volume access failure
|
| Probable Cause
|
|
|
For Export, the logical volume could not be
|
exported because the VTS stacked volume
|
containing the logical volume could not be
| accessed.
|
For Import, a logical volume or all logical
|
volumes on the Exported Stacked Volume
|
specified in the Import List file could not be
|
imported because the Exported Stacked Volume
| could not be accessed.
|
320
Magstar 3494 Tape Library Operator Guide
Resolution Actions
Determine why the specified volume is a duplicate in the
library.
Determine why the specified volume is a duplicate in the
enterprise.
1. Export or delete enough logical volumes from the
library to provide room for the needed imported
volumes.
2. Retry the import operation.
1. Refer to Figure 83 on page 140. For the volser
indicated, if the Status Flags are Inaccessible or
Misplaced, follow instructions in "Table for Problem
Determination using the Search Database for
Volumes Window" on page 281.
2. If the volser Status Flags are other than Inaccessible
or Misplaced, call an IBM Service Representative.