Table of Contents
Advertisement
v To unlock the keyboard and display when they have been locked from the
Lockup Library Manager under the Mode Pull-Down.
Figure 128. System Administrator Password Pop-Up Window
Current password
Specifies entry of the current password.
New password
Specifies entry of the new password.
Verify Specifies re-entry of the new password.
OK
Updates the password to the new password.
Cancel
Closes the pop-up window without changing the password.
Help
Provides additional information about the pop-up window.
If you enter the current password correctly, you can access the function.
Note: Do not forget the system administrator password. If this is the first time this
window is displayed, the Current password is the only entry required. This
entry becomes the system administrator password for all protected functions.
If you cannot remember the password, call your service representative.
You can change the password by entering a new password into the New password
and Verify fields after entering the current password. If the current password is
correct and the two new password fields match, you have access to the protected
functions and the password is changed. Changing the system administrator
password on one protected menu changes the password to all protected menus
except for the Service menu. If service mode is active, these functions do not
require the system administrator password.
Chapter 6. Advanced Operating Procedures
201
Advertisement
Table of Contents
