IBM Tape Library Magstar 3494 Operator's Manual page 347

|
Table 42. Status Codes and Status Text (continued)
| |
Operation Status
|
| Status Code
|
| 28
|
Status Text
|
Exported Stacked Volume processing error
|
Probable Cause
|
On Import, the file on the Exported Stacked
|
Volume containing the list of logical volumes
|
stored on the Exported Stacked Volume could
| not be read without error.
|
|
| Status Code
| 29
| Status Text
| Orphaned logical volume
|
Probable Cause
|
On Export, the VTS storage management code
|
does not recognize the logical volume volser;
| therefore, the logical volume cannot be exported.
|
|
| Status Code
|
| 30
|
| Status Text
|
| Logical volume assigned to insert category
|
|
|
Probable Cause
|
|
For Export, the logical volume is currently
| assigned to the insert category. Volumes in the
| insert category have not been accepted by a
| host and cannot be exported.
|
|
| Status Code
|
31
| Status Text
| Exported Stacked Volume unload failure
| Probable Cause
| For Import, the Exported Stacked Volume volser
| found in the Physical Volume field of the Status
| File record was used for importing logical
| volumes and could not be demounted from the
| tape drive and may not have been returned to
|
the Import category.
|
Resolution Actions
Suspected media failure, call an IBM Service
Representative.
Call an IBM Service Representative.
1. Check host systems attached to the VTS to insure
that they are processing volumes in the insert
category.
2. If the check above indicates that there is at least one
host which is processing volumes in the insert
category, determine why the specific volume has not
been processed.
Call an IBM Service Representative.
Appendix B. Virtual Tape Server Import/Export Advanced Function
325