Table of Contents
Advertisement
Cartridge Storage Cells
The cartridge cell locations are named so the operator can find the cartridges
during Manual mode operation. The cell name consists of three values: a wall
number, a column letter, and a row number. For example, Figure 19 shows cell
location 2 A 1.
Figure 19. Cartridge Storage Cell Names
Figure 20 on page 25 shows the cartridge storage cell labeling.
Wall number
Column letters
Row numbers
24
Magstar 3494 Tape Library Operator Guide
The wall numbers 3 that are even-numbered represent the walls on the
front doors of the library. The wall numbers that are odd-numbered
represent the walls on the rear of the library.
The column letters 1 range from A to E and are labeled from left to right.
Note: The control unit frame has only four columns; therefore, the letter
range is from A to D.
The row numbers 2 range from 1 to 20 or from 1 to 40, depending on the
frame and the wall. The numbers start with 1 at the top of the frame and
end at 40 for the lowest row.
Advertisement
Table of Contents
